Housing cap CAB 5978950.001 for S1000 / S3200 applicators

Housing cap CAB 5978950.001 for industrial label applicators

Housing cap CAB 5978950.001 is a mechanical replacement component for automatic CAB label applicators. Identified in the manufacturer’s documentation under the name “Cover ‘, it is part of the whole housing and control unit, being used to close the area where the control components are fitted.

The piece is documented for the applicators CAB S1000, S3200, SQ 1000 and SQ 3200, equipment used in industrial printing and automatic label application systems.

For companies using CAB equipment in production, packaging or logistics, correct identification of replacement components is essential. The original code 5978950.001 allows the selection of the appropriate piece without confusion with other elements of housing or mechanical accessories.

What is CAB cap 5978950.001 and what is its role?

CAB 5978950.001 is a mechanical housing cap that is part of the structure of compatible industrial applicators. It shall be mounted in the control assembly area and shall be clearly represented in the manufacturer’s technical drawings.

Closure of the control assembly

According to CAB exploded drawings, the cap is positioned next to the electronic control plate, fixed to the frame of the assembly by the corresponding mechanical elements.

Its constructive role is to close this area of the applicator and help preserve the mechanical configuration provided by the manufacturer.

Protection of internal components

By covering the control unit area, the cap contributes to the separation of internal components from accidental direct contact.

However, it must not be considered as a watertight housing or an element with a certain degree of IP protection as these characteristics are not individually specified for the piece 5978950.001.

Service component

The cap is available as an individual marker in CAB parts catalogues. This allows it to be identified and replaced in a service intervention without automatically requiring the replacement of the entire applicator.

Advantages of using the original CAB cap 5978950.001

The replacement of a damaged housing component is important for maintaining the equipment in the manufacturer’s design.

Identification by original code

The part is identified by CAB code 5978950.001, used in official service catalogues.

This code facilitates identification of the component and differentiation from other caps, panels or protective elements used in CAB equipment.

Integration into the existing whole

The part is designed for the mechanical position illustrated in the documentation of compatible applicators.

Prior to installation, the correspondence between the control pin, the applicator model and its configuration shall be checked.

Replacement of a damaged component

If a cap is cracked, deformed or has damaged fasteners, its replacement may be necessary to restore the mechanical assembly.

The assessment shall also include verification of the support framework and assembly elements.

Support maintenance operations

The availability of individually identified components allows technical teams to plan interventions and order the necessary parts.

For industrial applications, this approach can reduce the risk of delays caused by misidentification of a part.

CAB compatibility 5978950.001

The housing cap is present in official lists of parts for several CAB applicator families. Compatibility shall be checked according to the exact model and the constructive version.

CAB S1000 applicator

CAB S1000 is an industrial applicator for automatic label printing and application systems.

In the catalogue of S1000 tracks, code 5978950.001 is identified as Cover, heading 18 of the ensemble Chassis, PCBs, Service Unit.

The documentation covers the variants S1000- 220, S1000- 300 and S1000- 400.

CAB applicator S3200

CAB S3200 applies an automatic label application mechanism with dedicated mechanical, pneumatic and electronic components.

In documentation S3200, cover 5978950.001 appears under heading 18 of section “Chassis, Control unit ‘.

This identification allows verification of the part as a whole of the control unit.

CAB SQ 1000 applicator

CAB SQ 1000 is a family of applicators for printing and label application configurations compatible with the SQUIX platform.

In CAB SQ 1000, edition January 2026, the piece 5978950.001 is present in heading 20.

The documentation includes SQ 1000-220, SQ 1000-300, SQ 1000-400 and SQ 1000-520.

CAB application SQ 3200

Code 5978950.001 is also documented for CAB SQ 3200 applicator.

In the catalog of pieces from June 2025, the component appears under the German name “Haube ‘under heading 21 of the section” Gehäuse, Steuerung’.

Pre-command compatibility check

The presence of the same code in several catalogues confirms the use of the component in documented families but does not replace the verification of the equipment configuration.

To identify correctly, we recommend the transmission of the complete model, the equipment series and, if possible, a photograph of the part to be replaced.

CAB Specifications 5978950.001

The cap is identified in CAB catalogues as an individual mechanical part. Characteristics not explicitly published shall be confirmed prior to completion of the technical fiche.

Note: the codes of the fasteners are shown separately in CAB catalogues. The exact composition of the commercial package must be confirmed prior to purchase.

Where is CAB cap 5978950.001 fitted?

In the technical drawings of the S1000 and S3200 applicators, the cover is represented in the electronic control plate area and the support frame.

Position in the mechanical assembly

The part shall be mounted in the position prescribed in the explosive drawing of the equipment.

Components such as support frame, electronic plate, spacing elements and fasteners are represented in the same area.

Relationship with electronic control plate

The lid is a mechanical component separate from the electronic plate.

Replacement of the cap does not automatically imply changing the control plate, EEPROM memory or other electronic components.

Verification of fasteners

During the intervention the integrity of the screws, clamps and supports shall be checked.

If there are deformation or deterioration of the adjacent elements, they shall be evaluated before the new cap is fitted.

When should the housing CAB 5978950.001 be replaced?

Replacement may be necessary when the component has physical damage or can no longer be fixed correctly throughout the applicator.

The cap is broken or broken

Visible mechanical damage may affect the integrity of the component and may require its replacement.

Before the command it is important to check whether the damage is limited to the lid or involves the mounting frame.

The fixing points are damaged

If the grip areas are deformed or damaged, the cap may no longer be fitted to the intended position.

In such situations, intervention shall be carried out on the basis of service documentation.

Housing was deformed

A deformed component may interfere with proper mounting or access to the internal assembly.

The replacement shall be made with the piece corresponding to the equipment model.

Service interventions on the control unit

During a repair operation, technical personnel may remove the cover for access to internal components.

If it is damaged during use or can no longer be reused under appropriate conditions, an exchange mark may be required.

Installation of CAB cap 5978950.001

The mounting of the cap shall be in accordance with the service manual of the applicator. Intervention of the control unit requires compliance with safety measures for electrical and pneumatic equipment.

Equipment preparation

Before intervention, the equipment shall be stopped and secured in accordance with the manufacturer’s procedures, including by isolating the relevant energy sources.

Dismantling the existing cap

The removal of the component shall be carried out using the attachment points specified in the technical documentation.

Do not force the housing elements and avoid unnecessary contact with the electronic plate.

Mounting the new part

Cap 5978950.001 shall be positioned next to the frame and fixed with the appropriate elements.

Make sure the piece is placed correctly and does not interfere with any other components.

Verification after installation

After reassembly, technical personnel shall confirm the integrity of the assembly and perform the operational checks required for that intervention.

How do you choose the correct housing pieces for CAB applicators?

The identification of components by general names such as “cap ‘,” housing’ or “panel ‘may be insufficient as an industrial equipment contains several elements with similar functions.

Check CAB track number

For this component, the correct code is 5978950.001.

Compare it to the applicant’s list of parts and identification in the service documentation.

Check the family and model of the applicator

S1000, S3200, SQ 1000 and SQ 3200 are separate equipment, even if some components are common.

Write down the model just before command.

Consult the exploded drawing

CAB drawings illustrate the position of the component vis-à-vis the fasteners, mechanical frame and control plate.

This verification is useful when the old part no longer has a readable code.

Confirm package content

Check that any additional screws or mounting elements are required.

Their presence in the technical drawing does not automatically mean that they are included in the commercial package of the cap.

Use in maintenance of automatic labelling systems

CAB 5978950.001 is relevant for companies using industrial label applicators and integrators providing equipment maintenance.

Production and packaging

In automated production lines, CAB applicators may be integrated into product and packaging labelling processes.

The availability of mechanical spare parts facilitates the planning of technical interventions.

Logistics and distribution

Printing and label application systems are used to identify boxes, packages and logistics units.

Maintenance teams may use CAB official codes to identify the required components.

CAB Equipment Service

For service workshops, the association of code 5978950.001 with documented models allows proper preparation of controls and avoidance of confusion between components.

Order CAB cap 5978950.001 from AutoID

Do you need to replace the housing cap of a CAB S1000, S3200, SQ 1000 or SQ 3200?

AutoID allows you to request an offer for CAB 5978950.001, mechanical replacement part identified in the manufacturer’s official catalogues.

To verify compatibility, communicate the model of the applicator, the existing part code and relevant information about the equipment configuration.

Requests details of availability, commercial conditions and any necessary mounting accessories.

FAQ on CAB 5978950.001

1. What is CAB 5978950.001?

It is a housing cap used in the control unit area of industrial CAB label applicators.

2. Which applicators is compatible?

The code is documented for CAB S1000, S3200, SQ 1000 and SQ 3200. The exact configuration shall be checked.

3. Is it compatible with CAB S1000 applicator?

Yeah. The part appears under heading 18 in the official list of CAB S1000 parts.

4. Can it be used for CAB S3200?

CAB catalogue S3200 identifies the same code, 5978950.001, as a whole command unit.

5. Is it compatible with CAB SQ 1000 and SQ 3200 applicators?

Yeah. The code appears in official documentation for both families. Confirmation of the constructive variant is recommended.

6. Does the piece include the electronic control plate?

It is not presented as a complete electronic ensemble. The lid and the control plate are separate marks in CAB documentation.

7. Are the mounting screws included?

The contents of the package shall be confirmed prior to the command. Screws are identified separately in official lists of parts.

8. Is it necessary to replace the entire applicator if the cap is damaged?

Not necessarily. The cap is identified as an individual part, allowing the assessment of a separate replacement.

9. How do I identify the correct piece?

Check the full model of the applicator and code 5978950.001 in CAB service documentation.

10. Where can I order CAB cap 5978950.001?

You may request an offer via AutoID, indicating the manufacturer’s code and the equipment model.