Distribution module CAB S5106 5979035

S5106 dispensing module with label sensor

The CAB S5106 dispensing module is designed for labeling moving products on a conveyor and is intended for mounting on a CAB SQUIX 6.3 peel-off printer. This dispensing module has the following main features:

• Product code: 5979035
• Used with: CAB SQUIX 6.3 peel-off printer
• Label width: Supports labels with widths ranging from 2 to 7 inches (50-176 mm).
• Label height: Can handle labels with heights from 1 to 8 inches (25-210 mm).
• Print line to peel-off plate distance: Can vary between 13 and 20 inches (336-518 mm).
• Product surface: The module is designed to label products with flat surfaces.
• Product Height: It is configured for fixed height products.
• Product Status During Labeling: The product is in motion, and its speed is adjusted to the printer’s print speed.
• Labeling Speed: Approximately 60 labels per minute, calculated with a label height of 4 inches (100 mm) and a print speed of 4 inches/s (100 mm/s).

This dispensing mode uses a product sensor to detect the positions of the products on the conveyor. Once the “peel-off” function has been triggered, the next label is printed. The speed of the product on the conveyor must adjust to the printer’s print speed to ensure correct labeling.

This distribution system is ideal for industrial applications where labeling of moving products is required for efficient inventory management or other automated labeling operations.