CAB ST400 M label cutter stacker

CAB ST400 M Automatic Label Cutter Stacker

Here is information about the CAB ST400 M Automatic Label Cutter Stacker:

• ST400 M Cutter Stacker including base frame: This is a device that can cut printed materials and collect them. The printing process stops when the maximum number of collected labels has been reached. There may be limitations with rigid or curved materials, so it is recommended to test such operations.
• Positioning: The unit can be placed on a table in any position, using a base frame.
• Operated with: This ST400 M stacker cutter can be operated with the SQUIX 4.3 M, SQUIX 4 M, SQUIX 4.3 MT and SQUIX 4 MT printers.
• Material width (mm): Accepts materials with widths between 20 and 100 mm.
• Material weight (cardboard) (gr/m2): Can work with materials with a weight between 60 and 300 gr/m2.
• Material thickness (mm): Supports materials with a thickness between 0.05 and 0.8 mm.
• Cut length (mm): Cutting can be performed for lengths between 20 and 150 mm.
• Maximum material passage (mm): The maximum thickness of the material it can handle is 1.2 mm.
• Performance (cuts/minute): It can perform up to 100 cuts per minute.
• Printing stops in case of: missing final position for the cutter, paper jam, open cover, collection limit reached.
• Collection limit (mm, maximum): The maximum label collection limit is 100 mm.

This The automatic label cutter stacker is designed to work efficiently with a wide range of print materials and can be used in combination with certain CAB printer models, as mentioned above.