Oscillating stroke applicator 4514R-200 CAB 5966950
7.018,00 € incl. VAT
CAB 4514R-200 5966950 – Automatic profile/pipe label applicator 4514R-200 (indoor), Compatible with CAB Hermes Q/Hermes+ printers. Applies labels by blowing (5-10 mm distance). Label width: 10-80 mm. Label height: 10-60 mm. Speed: 20 labels/minute. Maximum application distance (with 200 mm cylinder): 150 mm
CAB Automatic Label Applicator with Oscillating Stroke 4514R-200
Product code: 5966950
This applicator is used for automatic labeling of the inner surfaces of profiles and pipes from all directions. It is compatible with CAB printers from the HERMES Q and Hermes+ series.
Features:
- Applies labels from all directions (top, bottom, side) on interior surfaces.
- Allows cylinder adjustment for precise label positioning.
- Uses a pad to pick up the label during printing and transfer it to the desired surface.
- Labels can be applied by blowing air (Blow-on pad), at a distance of 5-10 mm.
Technical specifications:
- Model: 4514 L/R 2100
- Label width compatible with HERMES Q2mm: 10-58 mm
- Label width compatible with HERMES Q4/Q4.3mm: 10-80 mm
- Label height: 10-60 mm
- Label application: top, bottom, side
- Maximum application distance (with 200 mm cylinder): 150 mm
- Weight (without packaging): 6-7 kg
- Power consumption: max. 15 W
- Compressed air pressure: 4.5 bar
- Apply speed (approx.): 20 labels/minute (for 40 mm high labels and 100 mm/s print speed)
Benefits:
- Applies labels from various directions on interior surfaces inaccessible by hand.
- Allows precise label application by adjusting the cylinder.
- Efficient for high volume label applications.
- Compatible with a wide range of label sizes.
The CAB 4514 swing-action applicator is an efficient solution for automatic labeling of profiles and pipes from various directions. It is ideal for high volume production where accuracy and application speed are important. However, the relatively high cost and the need for an air compressor may be factors to consider before purchasing.
The label applicator is designed to be used on a CAB printer from the HERMES Q and Hermes+ series.
| Technical data | Pad,
with breath |
|---|---|
| 4514 L/R 2100 | |
| Label width with HERMES Q2
HERMES Q4/Q4.3 |
10 – 58 mm |
| 10 – 80 mm | |
| Label height | 10 – 60 mm |
| Status of a product at rest | x |
| Applying the label from above
below dinside |
x |
| x | |
| x | |
| Product heights uniform | x |
| Swivel angle, vertical | 120° |
| Distance of a product to the bottom of the unit at cylinder stroke using a cylinder stroke of
200 to:
300 to: 400 to: |
150 mm |
| 250 mm | |
| 350 mm | |
| Applicator weight using a cylinder stroke of
200 excluding packaging 300 excluding packaging 400 excluding packaging |
6 kg |
| 6.5 kg | |
| 7 kg | |
| Energy consumption | 15 W max. |
| Compressed air | 4.5 bar |
| Cycle rate2) | approx. 20 labels/min |
- calculated using a 100 mm stroke under the unit, 40 mm high labels, a print speed of 100 mm/s
- depending on label height
